Curing-Free Ready-Mix Plaster (Pumpable)

About

Product Description

Curing-Free Ready-Mix Plaster (RMP) is an innovative solution that removes the need for water curing, streamlining the plastering process. This advanced formulation sets faster, enhances strength, and offers increased coverage while minimizing shrinkage cracks-ultimately reducing costs and saving valuable time.

SUITABLE SURFACE

image_Cemeco Plast

Hollow Blocks

image_Cemeco Plast

AAC Blocks

image_Cemeco Plast

Fly Ash Bricks

image_Cemeco Plast

Red Clay Bricks

image_Cemeco Plast

Cement Blocks

image_Cemeco Plast

Stone Walls

image_Cemeco Plast

Concrete Surfaces

image_Cemeco Plast
image_Cemeco Plast
Curing Free Ready-mix Plaster

Surface Preparation

Dry and clean

Ensure the surface is free from dust, dirt, oil, grease, loose particles, or any substance that may affect bonding. Clean the surface using a wire brush or high-pressure water jet. Ensure the surface is free from dampness, active leakage, algae, or fungal growth.

Roughness

Ensure the surface is sound and structurally stable. Pre-wet the surface and apply a cement–water slurry prior to application. Repair weak or damaged areas using Curing Free Pumpable RMP.

Evenness

Level the surface for uniform application.

Technical Data

Table Header Table Header Table Header Table Header
Pot Life:
1-1.5 hrs Under Normal Climate
Initial Setting Time:
120-150 Min.
Final Setting Time:
10 hours
Water Retentivity:
Min 95%
Compressive Strength:
Upto 15 MPa
Pull-Off Adhesion Strength:
Upto 0.8 MPa
Water Requirement:
0.13-0.15 litres per kg
Max Silt Content in Sand:
Less than 5%
Download Technical Details Sheet (TDS)
  • Alters consistency of plaster for easy pumping
  • Prevents segregation
  • Increases the productivity
  • Produces smoother surface
  • Reduces wall putty consumption
  • Saves time and labour
  • Reduces shrinkage and cracking
  • Increases the bond strength
  • Reduces rebound loss
  • EN 998 – Specification for Mortar for Masonry
  • IS 2250:1981 – Code of Practice for Preparation and Use of Masonry Mortars
  • A 40 kg bag of Curing Free Pumpable RMP covers up to 25 sq. ft. at a thickness of 12mm on an even surface.
  • Follow all application instructions for surface preparation and mixing.
  • Mix in batches that can be used within 45-60 minutes.
  • Ensure the wall surface is neither too dry nor too moist before application.
  • Protect freshly plastered surfaces for at least 8 hours to prevent cracking.
  • Do not reuse mixed plaster or add water to a set mixture.
  • Avoid mixing materials from different batches.
  • Use safety gloves, goggles, and dust masks during handling.
  • Avoid inhalation of the mix and contact with eyes.
  • Keep the work area dust-free and wash hands thoroughly after use.
  • In case of eye contact, rinse immediately with clean water and seek medical attention if necessary.

Apply in layers:

  • Mix 0.13–0.15 litres of water per kg of Curing Free Pumpable RMP Apply at a thickness of 10–12 mm.

Mixing Procedure:

  • Gradually add the powder to water to minimize lump formation and achieve a smooth, homogeneous consistency
  • Use a drill mixer or paddle mixer to ensure uniform mixing.
  • Mix only the quantity that can be applied within 45–60 minutes to maintain workability and plasticity.

Application:

  • "Apply the mix with pumpable machine for proper adhesion" & in all other TDS use sentence "Apply the mix with sufficient force for proper adhesion."
  • Level the surface for a smooth finish.
  • No additional curing is required after application.

Curing Free & Waterproof

  • CemecoPlast Curing Free Pumpable Ready-Mix Plaster is supplied in 40 kg HDPE laminated waterproof bags.

Instaplast

  • CemecoPlast Instaplast Ready-Mix Plaster is supplied in 25 kg (5 bags of 5 kg each) HDPE laminated waterproof bags.

Shelf Life

  • 6 months from the date of sealed packaging.

Storage Recommendations:

  • Store in a cool, dry, and moisture-free area.
  • Keep bags sealed to prevent exposure to air
  • Avoid using sharp objects or dragging bags during unloading to prevent punctures.
Logo_Cemeco Plast

Cemecoplast: Plastering a Greener Tomorrow 

Facebook-f Instagram Linkedin-in Youtube
Quick Links
Products
Information
Location

Keshav Veela, 503, Near GSS, Bhuwana, Udaipur, Rajasthan, 313001 Udaipur, Rajasthan 313001 India

Email

info@cemecoplast.com

Phone

+91 9928908089, +91 9413321212

Copyright © 2024 Cemeco Plast, All Rights Reserved.

Menu