Instaplast Ready-Mix Plaster

About

Product Description

Instaplast The innovative solution for filling wall chases (Jiri) in electrical and plumbing work, is designed to meet the need for immediate plastering, especially in situations where traditional plastering is not feasible.

Instaplast eliminates the need for water curing and provides superior bonding strength compared to conventional plaster. Most importantly, the surface is ready for use in 2-3 hours after application, ensuring efficiency and reliability.

SUITABLE SURFACE

Commercial Applications

image_Cemeco Plast

Road Repair & Patchwork

image_Cemeco Plast

Industrial Flooring Solutions

image_Cemeco Plast

Transportation Infrastructure Repairs

image_Cemeco Plast

Marine & Coastal Structure Maintenance

image_Cemeco Plast

Tunnel Restoration & Reinforcement

Residential Applications

image_Cemeco Plast

Wall Crack & Surface Repairs

image_Cemeco Plast

Ceiling Plaster Restoration

image_Cemeco Plast

Terrace & Roof Waterproofing

image_Cemeco Plast

Wet Area (Bathroom) Maintenance

image_Cemeco Plast

Driveway & Pathway Repairs

image_Cemeco Plast
Instaplast Ready-mix Plaster

Surface Preparation

Dry and clean

Ensure the surface is free from dust, dirt, oil, grease, or any substance that could affect bonding. Clean using a wire brush. Avoid dampness, leakage, or fungus.

Roughness

Ensure the surface is rough and stable. Make the cutting properly and then repair the wall with Instaplast RMP.

Evenness

Level the surface for uniform application.

Technical Data

Table Header Table Header Table Header Table Header
Pot Life
30-40 minutes under normal climate
Initial Setting Time
20-30 Min
Final Setting Time
2-3 hours
Water Retentivity
Min 95%
Compressive Strength
<18 MPa
Pull-Off Adhesion Strength
<0.8 MPa
Water Requirement
0.13-0.15 litres per kg
Max Silt Content in Sand
Less than 5%
Application Thickness & Curing

Apply in layers:

  • Coat: Mix 5-6 litres of water with 40kg of Instaplast RMP. Apply 10–12 mm thickness to match the level of the wall plaster.

Mixing Instructions:

  • Gradually add powder to water to minimize lumps and achieve a smooth consistency. Use a drill mixer or paddle mixer for uniformity. Mix enough plaster within 30-40 minutes to maintain plasticity.

Application:

  • Apply the mix with sufficient force, just like traditional plaster, for proper adhesion. Level the surface for a smooth finish.

Curing:

  • No Curing is required after the application.
  • Use safety gloves, goggles, and dust masks during handling.
  • Avoid inhaling the mix or contact with your eyes.
  • Keep the area dust-free and wash hands thoroughly after use.
  • In case of eye contact, rinse with clean water and seek medical attention if necessary.
  • Follow all application instructions for surface preparation and mixing.
  • Mix in batches that can be used within 30 minutes.
  • Ensure the wall is not too dry or too moist before application.
  • Protect freshly plastered surfaces for 2 hours to prevent cracking.
  • Do not reuse mixed plaster or add water to a set mixture.
  • Avoid mixing materials from different batches.

Shelf Life

  • 12 months from the date of sealed packaging.

Storage Recommendations:

  • Store in a cool, dry, moisture-free area.
  • Keep bags sealed to prevent air exposure.
  • Avoid using sharp objects or dragging bags during unloading.
Logo_Cemeco Plast

Cemecoplast: Plastering a Greener Tomorrow 

Facebook-f Instagram Linkedin-in
Quick Links
Products
Information
Location

101 first floor shree chamber complex panchwati near RK mall, Udaipur, Rajasthan 313001

Email

info@cemecoplast.com

Phone

+91 9351086641, +91 9413321212

Copyright © 2024 Cemeco Plast, All Rights Reserved. | Powered By IFW Web Studio

Menu